Material Calculator

Get The Right Amount of Material for Your Project

Use this calculator to estimate how much material your project requires. Enter your project dimensions below to get an estimate in both cubic yards and tons. This tool provides estimates only, based on the measurements you enter—you are responsible for verifying your own measurements and site conditions.

Material Type

Please select a material type.

How would you like to enter your area?

Enter Length & Width Enter Square Feet

Measurement Units

Feet Inches

Length (feet)

Please enter a valid length.

Width (feet)

Please enter a valid width.

Depth (inches)

Please enter a valid depth.

Please Note: Results are estimates only and depend on the accuracy of the measurements you provide. You are responsible for measuring your own project area and depth. Please also note that we are not responsible if the material quantity ordered is not enough for the project.

Your Estimate

Square Feet

Cubic Yards

Tons

Note: This calculator provides an estimate of the amount of aggregate you'll need for your project. Actual amounts may vary based on material settling, compaction, and site conditions. We recommend ordering 5-10% extra material to account for waste and settling. This estimate is based on the measurements you entered, and you are responsible for verifying those measurements. Please also note that we are not responsible if the material quantity ordered is not enough for the project.

Ready to Order?

Your project covers 0 square feet. We can deliver 0 cubic yards (0 tons) of materials throughout Johnson County and surrounding areas.

Call: (817) 558-1966

Email: delivery@kkranchstone.info

Email This Material Estimate

Enter your contact information and we will email you this material estimate. Our delivery team will follow up with you before finalizing any orders of aggregate materials.

Your Estimate

Material

Filled in by the calculator above.

Area (Square Feet)

Depth (Inches)

Cubic Yards

Tons

Your Contact Information

First Name

Last Name

Email Address

Phone Number

City

e.g. Cleburne, Burleson or Godley.

Delivery Address

The street address where the materials should be delivered.

Project Notes

Optional - tell us more about your project or any special requirements.

* Required field

Coverage Reference

General Rule: One ton of sand or gravel (1¼ inch or smaller) covers approximately 100 square feet at 2 inches deep.

Coverage decreases as aggregate size increases. Use the calculator above for a more accurate estimate based on your specific material and dimensions.

Need Gravel, Sand, or Road Base Delivered To Your Site?

Tell Us Your Project Needs - We're Here To Help!

Let's Talk!